SERVICES

Soil & Groundwater Sampling
-
Standard sampling with Geoprobe® MC5 or DT22 sampling system
-
Larger diameter cores with the DT37 system

Remediation Injection
-
Several pump and mixing options to match our equipment with the needs for your site

Soil Vapor Sampling
-
Geoprobe® Post Run Tubing system using 1½" rods
-
Permanent or temporary wells using PVC

Concrete Coring
-
Diamond cores from 2" to 14" diameter through slab up to 16"
-
Rotary hammer cores of 3" diameter through slab up to 6"

Well Installation & Abandonment
-
Prepack wells from ¾" to 2" diameter with 4" bore hole
-
Abandonment of wells up to 2" with direct push or hollow stem auger

Well Development & Monument Repair
-
Develop up to 2" wells by submersible pump and surge
-
Monument replacement and well alteration if needed
ABOUT
Pacific Soil + Water was founded in 2007 to provide direct push drilling services to clients with sites in Oregon and Washington.
The protection of ourselves, our clients, and the general public from injury and property damage is the core component of our culture. We have developed and implemented a behavior based safety program into all areas of our operations. A core concept of behavior based safety is that most incidents are due to unsafe acts and can be prevented. Employee participation in identifying at-risk conditions and behaviors is central to our safety program. Health and safety briefings are held every morning to evaluate each task for potential environmental and site hazards. This safety program empowers personnel with the authority to stop work when they believe and unsafe condition may exist.
​
Oregon Monitoring Well Constructor License
10629
10582
Washington Resource Protection Well Operator
3040
2963
40-hour HAZWOPER with annual 8-hour refresher
First Aid / CPR / AED
TSA TWIC
API Worksafe
​
​
​
​
EQUIPMENT

Limited Access
-
11' required overhead clearance
-
35" wide
-
7' 5" overall length
-
4' tooling used
AMS
9130-VTR-D
Download 9130-VTR-D Specs:
Limited Access
-
13' required overhead clearance
-
72" wide
-
12' 6" overall length
-
5' tooling used
AMS
9500-VTR
Download 9500-VTR Specs:


Truck-Mounted
-
12' 9" required overhead clearance (mast height, for boring locations)
-
10' 6" required overhead clearance (truck box height, for truck access)
-
8' wide
-
5' tooling used
​
Geoprobe®
6600
Download 6600 Specs:
CONTACT
For Quotes and Scheduling:
Mailing Address:
9790 SW Pembrook St.
Tigard, OR 97224
Employment:
Please send resume to:
